OpticGard - защита за визьора Holosun® 510C, която предлага защита срещу летящи проектили и драскотини. Благодарение на интелигентния изрез, защитата се адаптира към повечето задни визьори и заглушители. Тя включва също и сменяема тренировъчна леща, позволяваща използването на червената точка при ярка слънчева светлина или в осветени среди. Нашите защити са изработени от TPU (термопластичен полиуретан), материал, който предлага устойчивост на износване. Те позволяват също така бърз и лесен монтаж, гарантирайки лесен достъп до бутоните без необходимост от сваляне на защитата. Накрая, комбинираните щифтове гарантират, че защитата остава на място дори при силен откат на оръжието. Писнало ви е да покривате визьорите си за оклузивни тренировки? Нашата сменяема тренировъчна леща е модерно решение! Основни характеристики: Удобен при използването на оръжия Предоставя защита срещу летящи проектили и драскотини Интелигентен изрез, който се адаптира към повечето задни визьори и заглушители Включва сменяема тренировъчна леща за използване в осветени среди Спомага за оклузивни тренировки Изработен от TPU и поликарбонат, предлагащ устойчивост на износване Комбинирани щифтове за сигурно закрепване, дори при силен откат ЗАБЕЛЕЖКА: ЗАЩИТАТА OPTICGARD МОЖЕ ДА НЕ Е СЪВМЕСТИМА СЪС ЗАДНИ ВИЗЬОРИ, МОНТИРАНИ ПРЕД ГЛАВНИЯ ВИЗЬОР. НЕОБХОДИМО Е ДОСТАТЪЧНО ПРОСТРАНСТВО ВЪРХУ ТЯЛОТО НА ВИЗЬОРА ЗА СИГУРНО ЗАКРЕПВАНЕ. Entworfen in den USA. Patentanmeldung läuft - Der weltweit erste Zielfernrohrschutz, der Ihre Optik vor Absplittern, Kratzern und Schrammen während des Einsatzes schützt. Erhält die Sichtbarkeit des Rotpunkts, anders als andere Staubschutzabdeckungen, die vor der Nutzung vom Rotpunkt entfernt werden müssen. Stoßfest - Die Opticgard-Zielfernrohrabdeckung mit integrierten Verriegelungsstiften ist stoßfest und wurde entwickelt, um das Visier vor Kratzern und Schrammen durch regelmäßigen Gebrauch zu schützen. OpticGard-Abdeckung mit intelligentem Schnitt, um die Abdeckung an die meisten hinteren Visiere anzupassen. Enthält eine Trainingslinse für Okklusionstraining Schnelle und einfache Installation mit Zugang zu den Tasten Стамбени данни EAN: 4055132027490 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 88.9x44.45x44.45 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Black тегло: 56.7 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard - защита за визьора Holosun® 510C, която предлага защита срещу летящи проектили и драскотини. Благодарение на интелигентния изрез, защитата се адаптира към повечето задни визьори и заглушители. Тя включва също и сменяема тренировъчна леща, позволяваща използването на червената точка при ярка слънчева светлина или в осветени среди. Нашите защити са изработени от TPU (термопластичен полиуретан), материал, който предлага устойчивост на износване. Те позволяват също така бърз и лесен монтаж, гарантирайки лесен достъп до бутоните без необходимост от сваляне на защитата. Накрая, комбинираните щифтове гарантират, че защитата остава на място дори при силен откат на оръжието. Писнало ви е да покривате визьорите си за оклузивни тренировки? Нашата сменяема тренировъчна леща е модерно решение! Основни характеристики: Удобен при използването на оръжия Предоставя защита срещу летящи проектили и драскотини Интелигентен изрез, който се адаптира към повечето задни визьори и заглушители Включва сменяема тренировъчна леща за използване в осветени среди Спомага за оклузивни тренировки Изработен от TPU и поликарбонат, предлагащ устойчивост на износване Комбинирани щифтове за сигурно закрепване, дори при силен откат ЗАБЕЛЕЖКА: ЗАЩИТАТА OPTICGARD МОЖЕ ДА НЕ Е СЪВМЕСТИМА СЪС ЗАДНИ ВИЗЬОРИ, МОНТИРАНИ ПРЕД ГЛАВНИЯ ВИЗЬОР. НЕОБХОДИМО Е ДОСТАТЪЧНО ПРОСТРАНСТВО ВЪРХУ ТЯЛОТО НА ВИЗЬОРА ЗА СИГУРНО ЗАКРЕПВАНЕ. Entworfen in den USA. Patentanmeldung läuft - Der weltweit erste Zielfernrohrschutz, der Ihre Optik vor Absplittern, Kratzern und Schrammen während des Einsatzes schützt. Erhält die Sichtbarkeit des Rotpunkts, anders als andere Staubschutzabdeckungen, die vor der Nutzung vom Rotpunkt entfernt werden müssen. Stoßfest - Die Opticgard-Zielfernrohrabdeckung mit integrierten Verriegelungsstiften ist stoßfest und wurde entwickelt, um das Visier vor Kratzern und Schrammen durch regelmäßigen Gebrauch zu schützen. OpticGard-Abdeckung mit intelligentem Schnitt, um die Abdeckung an die meisten hinteren Visiere anzupassen. Enthält eine Trainingslinse für Okklusionstraining Schnelle und einfache Installation mit Zugang zu den Tasten Стамбени данни EAN: 4055132027520 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 88.9x44.45x44.45 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: FDE (Flat Dark Earth) тегло: 56.7 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard - защита за визьора Holosun® 510C, която предлага защита срещу летящи проектили и драскотини. Благодарение на интелигентния изрез, защитата се адаптира към повечето задни визьори и заглушители. Тя включва също и сменяема тренировъчна леща, позволяваща използването на червената точка при ярка слънчева светлина или в осветени среди. Нашите защити са изработени от TPU (термопластичен полиуретан), материал, който предлага устойчивост на износване. Те позволяват също така бърз и лесен монтаж, гарантирайки лесен достъп до бутоните без необходимост от сваляне на защитата. Накрая, комбинираните щифтове гарантират, че защитата остава на място дори при силен откат на оръжието. Писнало ви е да покривате визьорите си за оклузивни тренировки? Нашата сменяема тренировъчна леща е модерно решение! Основни характеристики: Удобен при използването на оръжия Предоставя защита срещу летящи проектили и драскотини Интелигентен изрез, който се адаптира към повечето задни визьори и заглушители Включва сменяема тренировъчна леща за използване в осветени среди Спомага за оклузивни тренировки Изработен от TPU и поликарбонат, предлагащ устойчивост на износване Комбинирани щифтове за сигурно закрепване, дори при силен откат ЗАБЕЛЕЖКА: ЗАЩИТАТА OPTICGARD МОЖЕ ДА НЕ Е СЪВМЕСТИМА СЪС ЗАДНИ ВИЗЬОРИ, МОНТИРАНИ ПРЕД ГЛАВНИЯ ВИЗЬОР. НЕОБХОДИМО Е ДОСТАТЪЧНО ПРОСТРАНСТВО ВЪРХУ ТЯЛОТО НА ВИЗЬОРА ЗА СИГУРНО ЗАКРЕПВАНЕ. Entworfen in den USA. Patentanmeldung läuft - Der weltweit erste Zielfernrohrschutz, der Ihre Optik vor Absplittern, Kratzern und Schrammen während des Einsatzes schützt. Erhält die Sichtbarkeit des Rotpunkts, anders als andere Staubschutzabdeckungen, die vor der Nutzung vom Rotpunkt entfernt werden müssen. Stoßfest - Die Opticgard-Zielfernrohrabdeckung mit integrierten Verriegelungsstiften ist stoßfest und wurde entwickelt, um das Visier vor Kratzern und Schrammen durch regelmäßigen Gebrauch zu schützen. OpticGard-Abdeckung mit intelligentem Schnitt, um die Abdeckung an die meisten hinteren Visiere anzupassen. Enthält eine Trainingslinse für Okklusionstraining Schnelle und einfache Installation mit Zugang zu den Tasten Стамбени данни EAN: 4055132027247 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 88.9x44.45x44.45 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Carbon Fiber тегло: 56.7 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard - защита за визьора Holosun® 510C, която предлага защита срещу летящи проектили и драскотини. Благодарение на интелигентния изрез, защитата се адаптира към повечето задни визьори и заглушители. Тя включва също и сменяема тренировъчна леща, позволяваща използването на червената точка при ярка слънчева светлина или в осветени среди. Нашите защити са изработени от TPU (термопластичен полиуретан), материал, който предлага устойчивост на износване. Те позволяват също така бърз и лесен монтаж, гарантирайки лесен достъп до бутоните без необходимост от сваляне на защитата. Накрая, комбинираните щифтове гарантират, че защитата остава на място дори при силен откат на оръжието. Писнало ви е да покривате визьорите си за оклузивни тренировки? Нашата сменяема тренировъчна леща е модерно решение! Основни характеристики: Удобен при използването на оръжия Предоставя защита срещу летящи проектили и драскотини Интелигентен изрез, който се адаптира към повечето задни визьори и заглушители Включва сменяема тренировъчна леща за използване в осветени среди Спомага за оклузивни тренировки Изработен от TPU и поликарбонат, предлагащ устойчивост на износване Комбинирани щифтове за сигурно закрепване, дори при силен откат ЗАБЕЛЕЖКА: ЗАЩИТАТА OPTICGARD МОЖЕ ДА НЕ Е СЪВМЕСТИМА СЪС ЗАДНИ ВИЗЬОРИ, МОНТИРАНИ ПРЕД ГЛАВНИЯ ВИЗЬОР. НЕОБХОДИМО Е ДОСТАТЪЧНО ПРОСТРАНСТВО ВЪРХУ ТЯЛОТО НА ВИЗЬОРА ЗА СИГУРНО ЗАКРЕПВАНЕ. Entworfen in den USA. Patentanmeldung läuft - Der weltweit erste Zielfernrohrschutz, der Ihre Optik vor Absplittern, Kratzern und Schrammen während des Einsatzes schützt. Erhält die Sichtbarkeit des Rotpunkts, anders als andere Staubschutzabdeckungen, die vor der Nutzung vom Rotpunkt entfernt werden müssen. Stoßfest - Die Opticgard-Zielfernrohrabdeckung mit integrierten Verriegelungsstiften ist stoßfest und wurde entwickelt, um das Visier vor Kratzern und Schrammen durch regelmäßigen Gebrauch zu schützen. OpticGard-Abdeckung mit intelligentem Schnitt, um die Abdeckung an die meisten hinteren Visiere anzupassen. Enthält eine Trainingslinse für Okklusionstraining Schnelle und einfache Installation mit Zugang zu den Tasten Стамбени данни EAN: 4055132027506 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 88.9x44.45x44.45 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Red тегло: 56.7 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard - защита за визьора Holosun® 510C, която предлага защита срещу летящи проектили и драскотини. Благодарение на интелигентния изрез, защитата се адаптира към повечето задни визьори и заглушители. Тя включва също и сменяема тренировъчна леща, позволяваща използването на червената точка при ярка слънчева светлина или в осветени среди. Нашите защити са изработени от TPU (термопластичен полиуретан), материал, който предлага устойчивост на износване. Те позволяват също така бърз и лесен монтаж, гарантирайки лесен достъп до бутоните без необходимост от сваляне на защитата. Накрая, комбинираните щифтове гарантират, че защитата остава на място дори при силен откат на оръжието. Писнало ви е да покривате визьорите си за оклузивни тренировки? Нашата сменяема тренировъчна леща е модерно решение! Основни характеристики: Удобен при използването на оръжия Предоставя защита срещу летящи проектили и драскотини Интелигентен изрез, който се адаптира към повечето задни визьори и заглушители Включва сменяема тренировъчна леща за използване в осветени среди Спомага за оклузивни тренировки Изработен от TPU и поликарбонат, предлагащ устойчивост на износване Комбинирани щифтове за сигурно закрепване, дори при силен откат ЗАБЕЛЕЖКА: ЗАЩИТАТА OPTICGARD МОЖЕ ДА НЕ Е СЪВМЕСТИМА СЪС ЗАДНИ ВИЗЬОРИ, МОНТИРАНИ ПРЕД ГЛАВНИЯ ВИЗЬОР. НЕОБХОДИМО Е ДОСТАТЪЧНО ПРОСТРАНСТВО ВЪРХУ ТЯЛОТО НА ВИЗЬОРА ЗА СИГУРНО ЗАКРЕПВАНЕ. Entworfen in den USA. Patentanmeldung läuft - Der weltweit erste Zielfernrohrschutz, der Ihre Optik vor Absplittern, Kratzern und Schrammen während des Einsatzes schützt. Erhält die Sichtbarkeit des Rotpunkts, anders als andere Staubschutzabdeckungen, die vor der Nutzung vom Rotpunkt entfernt werden müssen. Stoßfest - Die Opticgard-Zielfernrohrabdeckung mit integrierten Verriegelungsstiften ist stoßfest und wurde entwickelt, um das Visier vor Kratzern und Schrammen durch regelmäßigen Gebrauch zu schützen. OpticGard-Abdeckung mit intelligentem Schnitt, um die Abdeckung an die meisten hinteren Visiere anzupassen. Enthält eine Trainingslinse für Okklusionstraining Schnelle und einfache Installation mit Zugang zu den Tasten Стамбени данни EAN: 4055132027131 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 88.9x44.45x44.45 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Gunmetal тегло: 56.7 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

OpticGard - защита за визьора Holosun® 510C, която предлага защита срещу летящи проектили и драскотини. Благодарение на интелигентния изрез, защитата се адаптира към повечето задни визьори и заглушители. Тя включва също и сменяема тренировъчна леща, позволяваща използването на червената точка при ярка слънчева светлина или в осветени среди. Нашите защити са изработени от TPU (термопластичен полиуретан), материал, който предлага устойчивост на износване. Те позволяват също така бърз и лесен монтаж, гарантирайки лесен достъп до бутоните без необходимост от сваляне на защитата. Накрая, комбинираните щифтове гарантират, че защитата остава на място дори при силен откат на оръжието. Писнало ви е да покривате визьорите си за оклузивни тренировки? Нашата сменяема тренировъчна леща е модерно решение! Основни характеристики: Удобен при използването на оръжия Предоставя защита срещу летящи проектили и драскотини Интелигентен изрез, който се адаптира към повечето задни визьори и заглушители Включва сменяема тренировъчна леща за използване в осветени среди Спомага за оклузивни тренировки Изработен от TPU и поликарбонат, предлагащ устойчивост на износване Комбинирани щифтове за сигурно закрепване, дори при силен откат ЗАБЕЛЕЖКА: ЗАЩИТАТА OPTICGARD МОЖЕ ДА НЕ Е СЪВМЕСТИМА СЪС ЗАДНИ ВИЗЬОРИ, МОНТИРАНИ ПРЕД ГЛАВНИЯ ВИЗЬОР. НЕОБХОДИМО Е ДОСТАТЪЧНО ПРОСТРАНСТВО ВЪРХУ ТЯЛОТО НА ВИЗЬОРА ЗА СИГУРНО ЗАКРЕПВАНЕ. Entworfen in den USA. Patentanmeldung läuft - Der weltweit erste Zielfernrohrschutz, der Ihre Optik vor Absplittern, Kratzern und Schrammen während des Einsatzes schützt. Erhält die Sichtbarkeit des Rotpunkts, anders als andere Staubschutzabdeckungen, die vor der Nutzung vom Rotpunkt entfernt werden müssen. Stoßfest - Die Opticgard-Zielfernrohrabdeckung mit integrierten Verriegelungsstiften ist stoßfest und wurde entwickelt, um das Visier vor Kratzern und Schrammen durch regelmäßigen Gebrauch zu schützen. OpticGard-Abdeckung mit intelligentem Schnitt, um die Abdeckung an die meisten hinteren Visiere anzupassen. Enthält eine Trainingslinse für Okklusionstraining Schnelle und einfache Installation mit Zugang zu den Tasten Стамбени данни EAN: 4055132027360 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 88.9x44.45x44.45 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: OD Green тегло: 56.7 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027063 UPC: 688292663570 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Black тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027698 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Carbon Fiber тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027711 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: FDE (Flat Dark Earth) тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027797 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: FDE Camo тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027117 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Gunmetal тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027735 UPC: 688292725315 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Gunmetal Camo тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027841 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Navy Camo тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027728 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: OD Green тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027810 UPC: 688292725308 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: OD Green Camo тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027681 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Red тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027759 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: Red Camo тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

THIS COVER IS DESIGNED FOR 407C-X2 /507C-X2, IT DOES NOT FIT HOLOSUN 507C-V2/407C-V2. The OpticGard Scope cover for the Holosun® 507C-X2/407C-X2 offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Key Features: Can be used while using the firearm Offers protection against stray bullet casings and scratches Intelligent cut fits most rear and suppressor sights Includes detachable training lens for use in bright areas Helps with occlusion training Made from TPU material and polycarbonate for abrasion protection Interlocking pins for secure fit, even with heavy recoil NOTE: OPTICGARD COVERS MAY NOT BE COMPATIBLE WITH BACKUP SIGHTS THAT ARE MOUNTED IN FRONT OF THE OPTIC. SUFFICIENT SPACE IS NEEDED FOR THE COVER TO LATCH ONTO THE FRONT OF THE OPTIC HOUSING. NOTE: PLEASE INSTALL DETACHABLE LENS BEFORE COVER. Designed in USA Patent Pending- World's First Scope Protector That Protects Your Optics From Chips Scratches and Scuffs While in Action Maintains Red Dot Visibility Unlike Others Dust Cover Must Be Removed From Red Dot in Order For Use. Shockproof - Opticgard Scope Cover build in the Interlocking Pins Are Shockproof and is Designed to Shield the Optic From Scratches, Scuffs Caused by Regular Use OpticGard Cover with Intelligent Cut to Allow Cover to Fit Most of Rear Sight Includes a training lens for Occlussion training Fast and easy installation with access to buttons Аксесоари OpticGard Training Lens for Holosun 507C- X2/407C-X2 Стамбени данни EAN: 4055132027070 Гаранция: 1 години Customs tariff number: 90139005000 Механични параметри Размери: 50x34.29x34.29 мм Материал: Thermoplastisches Polyurethane (TPU) & Polycarbonate (PC) Цвят на кутията: White тегло: 28.35 г Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in den USA: Vollwertiger Optikschutz für Ihr Reflexvisier. Schützt vor Splittern, Kratzern, Patronenhülsen und Abnutzung. Stoßhemmend: Die OpticGard Schutzabdeckung ist schockabsorbierend und kann dauerhaft installiert bleiben ohne die Schusswaffennutzung einzuschränken. OpticGard-Schutzabdeckung mit präziser Kontur, die eine passgenaue Montage und vollen Zugriff auf die Bedienelemente ihres Reflexvisiers gewährleistet. Enthält eine Trainingslinse für das unverzichtbare Okklusionstraining. Schnelle, einfache und komplett werkzeuglose Installation/Deinstallation. Стамбени данни EAN: 4055132032265 UPC: 688293031330 Customs tariff number: 90139005000 Механични параметри Цвят на кутията: Black Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in den USA: Vollwertiger Optikschutz für Ihr Reflexvisier. Schützt vor Splittern, Kratzern, Patronenhülsen und Abnutzung. Stoßhemmend: Die OpticGard Schutzabdeckung ist schockabsorbierend und kann dauerhaft installiert bleiben ohne die Schusswaffennutzung einzuschränken. OpticGard-Schutzabdeckung mit präziser Kontur, die eine passgenaue Montage und vollen Zugriff auf die Bedienelemente ihres Reflexvisiers gewährleistet. Enthält eine Trainingslinse für das unverzichtbare Okklusionstraining. Schnelle, einfache und komplett werkzeuglose Installation/Deinstallation. Стамбени данни EAN: 4055132032173 UPC: 688293031385 Customs tariff number: 90139005000 Механични параметри Цвят на кутията: Carbon Fiber Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in den USA: Vollwertiger Optikschutz für Ihr Reflexvisier. Schützt vor Splittern, Kratzern, Patronenhülsen und Abnutzung. Stoßhemmend: Die OpticGard Schutzabdeckung ist schockabsorbierend und kann dauerhaft installiert bleiben ohne die Schusswaffennutzung einzuschränken. OpticGard-Schutzabdeckung mit präziser Kontur, die eine passgenaue Montage und vollen Zugriff auf die Bedienelemente ihres Reflexvisiers gewährleistet. Enthält eine Trainingslinse für das unverzichtbare Okklusionstraining. Schnelle, einfache und komplett werkzeuglose Installation/Deinstallation. Стамбени данни EAN: 4055132032203 UPC: 688293031347 Customs tariff number: 90139005000 Механични параметри Цвят на кутията: FDE (Flat Dark Earth) Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in den USA: Vollwertiger Optikschutz für Ihr Reflexvisier. Schützt vor Splittern, Kratzern, Patronenhülsen und Abnutzung. Stoßhemmend: Die OpticGard Schutzabdeckung ist schockabsorbierend und kann dauerhaft installiert bleiben ohne die Schusswaffennutzung einzuschränken. OpticGard-Schutzabdeckung mit präziser Kontur, die eine passgenaue Montage und vollen Zugriff auf die Bedienelemente ihres Reflexvisiers gewährleistet. Enthält eine Trainingslinse für das unverzichtbare Okklusionstraining. Schnelle, einfache und komplett werkzeuglose Installation/Deinstallation. Стамбени данни EAN: 4055132032210 UPC: 688293031392 Customs tariff number: 90139005000 Механични параметри Цвят на кутията: FDE Camo Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in den USA: Vollwertiger Optikschutz für Ihr Reflexvisier. Schützt vor Splittern, Kratzern, Patronenhülsen und Abnutzung. Stoßhemmend: Die OpticGard Schutzabdeckung ist schockabsorbierend und kann dauerhaft installiert bleiben ohne die Schusswaffennutzung einzuschränken. OpticGard-Schutzabdeckung mit präziser Kontur, die eine passgenaue Montage und vollen Zugriff auf die Bedienelemente ihres Reflexvisiers gewährleistet. Enthält eine Trainingslinse für das unverzichtbare Okklusionstraining. Schnelle, einfache und komplett werkzeuglose Installation/Deinstallation. Стамбени данни EAN: 4055132032197 UPC: 688293031378 Customs tariff number: 90139005000 Механични параметри Цвят на кутията: Gunmetal Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

The OpticGard Scope cover for the Holosun® SCS Carry offers protection against stray bullet casings and scratches. The intelligent cut allows the cover to fit most rear and suppressor sights. It also includes a detachable training lens which will allow you to use the red dot even in the sun or bright areas. Our scope covers are made from a material made from TPU (Thermoplastic Polyurethane) offering protection from abrasion. In addition, the fast and simple installation allows easy access to the buttons without removing the cover. Finally, the interlocking pins secures the cover so it won't fall off even with heavy recoil from handgun slides. Are you tired of taping your optic for occlusion training? Our removable training lens is the modern solution! Note: Important Information OpticGard Covers may not be compatible with backup sights that are mounted in front of the optic. Sufficient space is needed for the cover to latch onto the front of the optic housing. OpticGard will add approximately 0.08 inches (2mm) to the sides of the optic. If using in conjunction with a holster, please make sure there is sufficient spacing between the holster with the cover on. Designed in den USA: Vollwertiger Optikschutz für Ihr Reflexvisier. Schützt vor Splittern, Kratzern, Patronenhülsen und Abnutzung. Stoßhemmend: Die OpticGard Schutzabdeckung ist schockabsorbierend und kann dauerhaft installiert bleiben ohne die Schusswaffennutzung einzuschränken. OpticGard-Schutzabdeckung mit präziser Kontur, die eine passgenaue Montage und vollen Zugriff auf die Bedienelemente ihres Reflexvisiers gewährleistet. Enthält eine Trainingslinse für das unverzichtbare Okklusionstraining. Schnelle, einfache und komplett werkzeuglose Installation/Deinstallation. Стамбени данни EAN: 4055132032418 UPC: 688293031415 Customs tariff number: 90139005000 Механични параметри Цвят на кутията: Gunmetal Camo Информация за безопасността на продукта Производител Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Отговорен икономически оператор Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]